View CX60087_1794714.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 1 of 18 mindspeed proprietary and confidential data sheet CX60087 10.7 gbps eml and lino 3 modulator driver key features ? ? high voltage swing: up to 6 v p-p for single-ended and 12 v p-p for differential output ? high-speed operation (up to 10.7 gbps nrz data) ? on-chip data retiming option ? single-ended data and clock input with 50 ? termination ? output current of 0-100 ma into 50 ? ? optimized to supply an output current of 80 to 100 ma into 50 ? ? laser diode bias current of 0 - 120 ma ? duty control, polarity control and loss of signal indication applications ? fiber optic transceiver/transponder modules ? fiber optic communication systems (oc-192/stm-64) ? sonet/sdh test equipment ? data communications ? voltage driver product description the CX60087 is a high-speed laser modulator driver designed for long haul applications. this driver is typically used in trans mitter modules for fiber- optic communications, such as synchronous optical network (sonet), synchronous digital hierarchy (sdh), and dense wavelength di vision multiplexed (dwdm). the device can be used as a lithium niobate (lino 3 ) modulator driver or ea modulator driver when an output bias-tee is tied to +1.0 v, the CX60087 provides a 6 v p-p output swing single-ended and 12 v p-p swing differential into a 50 ? load for data rates of 10.7 gbps. when the output bias-tee is tied to ground the output swing is 3.5 v p-p single-ended at 10.7 gbps. the CX60087 can deliver a maximum output drive current of 100 ma and provide bias currents up to 120 ma. figure 1 is the funct ional block diagram, table 1 lists functional block descriptions, and table 2 lists terminal name descriptions. the CX60087 is available i n a 30-terminal ceramic quad flat pack as shown in figure 13. figure 1. CX60087 laser modulator driver functional block diagram datacap datain clkcap clkin ipoutp ipoutn ipmonp ipmonn d-ff polarity cntlr duty cntlr out buffer driver dc bias current cntlr los detect drvmon los dutycntl polcntl ibcntl ibmon ib ipcntl 2:1 mux inbuffers retimdisable
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 2 of 18 mindspeed proprietary and confidential table 1. functional block descriptions block function 2:1 mux data or retimed data select dc bias current cntlr laser diode dc bias current controller d-ff d-type flip flop for retiming input signal driver output driver stage with 200 ? on-chip back termination (variable output current) drvmon output current and duty cycle monitor circuit (sinks 1/20 the value of driver current) dutycntlr duty cycle control of output current (external control) inbuffers single-ended data and clock input/differential output buffer amplifiers los detect loss of input signal detector outbuffer buffer amplifier polaritycntlr polarity control circuit table 2. terminal name descriptions number terminal name description type i/o rate/dc 13 clkin clock input cml i 10 ghz 16 clkcap clkin reference terminal i dc 11 datain data input cml i 10 gbps 8 datacap datain reference terminal i dc 17 dutycntl output current, duty cycle control signal input analog i dc 1 ib laser diode, dc bias current output current sink o dc 2 ibcntl dc bias current, control signal input analog i dc 3 ibmon dc bias current monitor o dc 19 ipcntl output current, control signal input analog i dc 20 ipmonn output current monitor, inverted output current sink o dc 21 ipmonp output current monitor, non-inverted output current sink o dc 25 ipoutn inverted output current output o 10 gbps 27 ipoutp non-inverted output current output o 10 gbps 6 los loss of input or clock signal indicator output current sink (1) o dc 5 polcntl input signal polarity control signal input ecl i dc 7 retimdisable input for disabling data and clock retiming (2) i dc note 1. see description of current sinking in los section, figure 6. note 2. to select retimed data this terminal can be connected to v ee or it can float. connecting the retimdisable terminal to ground selects non-retimed data.
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 3 of 18 mindspeed proprietary and confidential functional description the CX60087 translates the single ended input data on datain from a digital voltage signal to current signals on the complement ary ipoutp, ipoutn terminals for driving a (lino 3 ) or an eml modulator. data is retimed with clkin in the d-type flip-flop (d-ff) and output to the 2:1 mux. the 2:1 mux under control of the retimdis able terminal selects retimed data from the d-ff. the duty cycle and polarity of the output signal are controlled using the dutycntl and polcntl pins respectively. the data output pulse current on ipoutp/n is adjusted using the ipcntl terminal and monitored using the ipmonp and ipmonn termi nals. the dc bias current controller provides current (ib) for an external diode laser. current is adjusted using the ibcntl termina l and monitored on the ibmon terminal. the los detect circuit detects loss of input signal and indicates that condition on the los terminal. high speed data and clock inputs the datain and clkin terminals are high-speed inputs that each include a 50 ? on-chip termination resistor to ground. these terminals are cml interface compatible. datain retiming the datain signal is retimed by the d-ff with clkin. see figure 2 for the datain and clkin timing relationship. note: during retiming mode tests, with scope synchronized to the system strobe, a shift in crossover point timing of 1.0 picosecond per degree c in relation to t he strobe can occur. figure 2. falling edge of clkin synchronized to datain signal transition datain clkin t skew 10 ps< <90 ps t skew 20 ps 20 ps retiming terminal the retimdisable terminal controls the 2:1 mux output. when retimdisable is open (floats) or is connected to vee, retimed data is selected for output. when this terminal is grounded, the non-retimed data is selected for output. polarity control polarity of the differential signal ipoutp/ipoutn pulse can be inverted by an external control voltage on the polcntl terminal. with polcntl open or connected to an ecl low, the output is inverted; with polcntl at ground or an ecl high, the output is non-inverted.
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 4 of 18 mindspeed proprietary and confidential duty cycle control dutycntl is an analog voltage input terminal, which controls the duty cycle of the data output on ipoutp/ipoutn. figure 3 illu strates the duty cycle as controlled by the dutycntl voltage value. figure 3. typical data output duty cycle vs. dutycntl voltage data output duty cycle 120% 80% dutycntl voltage (gnd = 0) -0.8 v 0% -1.8 v 0 v typical pulse current driver an external signal supplied to the ipcntl terminal controls the amplitude of the pulse modulation current. differential signal s on the ipmonp/n terminals monitor the ipoutp/n modulation current. figure 4 illustrates the output pulse current and ipmonp/n current versus t he ipcntl voltage. figure 4. typical output control characteristics ipcntl voltage 1.25 v 2.5 v 100 ma 1 ma 2.0 v 50 ma typical (referenced to v ee ) 0 0 5 ma 2.5 ma output pulse current ipmonp, ipmonn current 50 a
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 5 of 18 mindspeed proprietary and confidential dc bias current driver the ib terminal provides an adjustable dc bias current for a laser modulator or laser diode. an external voltage on the ibcntl terminal controls the dc bias current on ib. the ibmon terminal monitors the ib current. figure 5 illustrates the ib bias current and ib monitor cu rrents versus the ibcntl control voltage. figure 5. typical ib control characteristics ibcntl voltage 1.25 v 2.5 v 120 ma 1 ma 2.0 v 60 ma ib bias current 5 ma 2.5 ma 50 a ibmon typical (referenced to v ee ) 0 00 loss of signal detection the loss of signal detection circuit (los detect) indicates a loss of a valid signal in the data path (datain) and/or clock sig nal (clkin). if no voltage transitions occur during a specified time period, the los output terminal goes to a high level (ground). figure 6 illustrates t he los detect circuit timing waveforms. los can be used by an external control circuit to shut down both the output pulse current and dc bias current drivers. under normal operating conditions, when data is transitioning, los will remain low. for an interface other than cml, the los o utput can be made ecl logic compatible with the circuits shown in figures 10 and 11. figure 6. los detect circuit timing waveforms with signal: locked no signal: unlocked data or clock signals los l h v h v l activation: 1.0 sec < ? t < 10.0 sec ? t t release: 1.0 sec < ? t < 10.0 sec <1.0 sec <1.0 sec with signal: locked ?
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 6 of 18 mindspeed proprietary and confidential electrical specifications table 3 lists the CX60087 electrical specifications. absolute maximum ratings and recommended operating conditions are listed in table 4 and table 5 respectively. table 3. CX60087 electrical specifications tcase = 0 c to +85 c, v ee = ?5.2 v 5%, r l = 50 ? parameter symbol min. typical max. unit input data amplitude (datain) vdat 300 500 1000 mv p-p input data, vih level datain -0.2 0.0 +0.5 v input data, vil level datain -1.2 -0.9 -0.5 v input clock amplitude (clkin) vclk 300 500 1000 mv p-p input data duty cycle tdatoc 80 100 120 % input clk duty cycle tclkoc 40 50 60 % input data rise/fall tdatr, tdatf ? ? 50 ps input clk rise/fall tclkr, tclkf ? ? 40 ps datain return loss (dc-3ghz) s11data ? -20 ? db datain return loss (3-10ghz) s11data ? ? -10 db clkin return loss (1-12ghz) s11clk ? -10 ? db bias current output ib 1 - 120 ma peak output current ipout 40 (1) 100 110 ma ratio of ipoutp/n to ipmonp/n ((ipoutp/n) (ipmonp/n)) ipout/ipmon ? 20.00 ? ? maximum output swing (peak-to-peak with bias-tee to + 1.0 v) vout 4.5 5.0 6.0 v p-p maximum output swing (peak-to-peak without bias-tee) vout ? 3.0 ? v p-p output duty cycle range (retimed) ? 20 ? % output rise/fall time tipr, tipf ? 35 40 ps jitter added (2) (retimed) jrms ? 2 3 ps rms change in delay over temperature 1 ps/deg. c los v l (no transitions on datain/clkin) -0.2 0.0 ? v los v h (datain/clkin transitioning) -1.5 -0.9 -0.5 v t activation (no transitions on datain/clkin) 1.0 ? 10 s t release (datain / clkin transitioning) 1.0 ? 10 s power consumption (v out s-e equals 5.0 v p-p , no ibias) p max 1.8 ? w power consumption (quiescent) p q - 1.2 1.3 w note 1. output current can be lower, however eye quality degrades at low current values. note 2. valid only at v ee = ?5.2 v with clock and data = 500 mv p--p ( 150 mv.)
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 7 of 18 mindspeed proprietary and confidential table 4. CX60087 absolute maximum ratings exceeding the CX60087 absolute maximum ratings listed in table 4 will damage the unit. parameter symbol min. max. unit supply voltage v ee -7.0 +0.5 v input voltage vin vee -0.5 +0.5 v ip maximum current ipmax ? 180 ma ib maximum current ibmax ? 200 storage temperature tst -65 +150 c ? >2000 v electrostatic discharge (human body model) high-speed terminals esd 100 table 5. CX60087 recommended operating conditions parameter symbol min. typical max. unit vee supply voltage v ee ?4.68 ?5.20 ?5.72 v operating case temperature tc (1) 0.0 ? +85 c junction temperature tj (1) 0.0 ? +125 c relative humidity 5 ? 95 % note 1: see figure 7 for temperature measurement locations. figure 7. temperature measurement locations tj die tc heat slug package lead package body
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 8 of 18 mindspeed proprietary and confidential waveform evaluation figure 8 illustrates the CX60087 in an equivalent load circuit for waveform evaluation. figure 8. CX60087 equivalent load circuit for waveform evaluation CX60087 dutycntl ipcntl ipmonp ipmonn gnd polcntl gnd clkin gnd datain gnd ib veeo gndo ipoutp gndo ipoutn gndo retimdisable los clkcap ibmon ibcntl veeo data cap 28 27 26 25 24 23 22 21 20 19 15 9 5 1 4 3 2 8 7 6 12 11 10 14 13 18 17 16 index 30 29 gndo vee r3 c4 r4 r5 vee vee vee vee vee vee vee vee vee r2 c3 r1 +1.0 v l1 l1 c1 c2 +1.0 v ? component list r1 = 50 r2 = 50 r3 = 180 r4 = 180 r5 = 2k c1 = 0.12 f c2 = 0.12 f c3 = 15 nf l1 = 330 h l2 = 330 h ? ? ? ? c4 = 10 nf
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 9 of 18 mindspeed proprietary and confidential figures 9. CX60087 eye diagrams (directly measured no sonet filters with bias-tee connected to +1 volt) with re-timing.
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 10 of 18 mindspeed proprietary and confidential CX60087 eye diagrams (unfiltered, without bias-tee) the three following eye diagram show CX60087operation under unfiltered test conditions while directly driving a 50 ? load. figure 10a. output eye for CX60087 maximum signal swing with 10gbps ethernet eye mask, without a bias-tee.
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 11 of 18 mindspeed proprietary and confidential figure 10b. CX60087 output eye for minimum signal swing with 10 gbps ethernet eye mask, without a bias-tee
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 12 of 18 mindspeed proprietary and confidential figure 10c. CX60087 output eye for optimum signal swing with 10 gbps ethernet eye mask, without a bias-tee
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 13 of 18 mindspeed proprietary and confidential driver configuration figure 11 illustrates the CX60087 configured as single-ended lino 3 driver. figure 11. CX60087 single-ended mode lino 3 modulator driver application vee vee vee vee vee CX60087 dutycntl vee ipcntl ipmonp ipmonn gnd polaritycntl vee gnd clkin gnd datain gnd vee ib veeo gndo ipoutp gndo ipoutn gndo retimdisable los clkcap ibmon ibcntl vee veeo datacap 28 27 26 25 24 23 22 21 20 19 15 9 5 1 4 3 2 8 7 6 12 11 10 14 13 18 17 16 index 30 29 gndo vee r4 r3 c5 c3 amp1 amp2 r6 r7 r8 -2.0 v c4 optional duty control circuit single-ended modulator drive line r1 +1.0 v l1 +1.0 v l2 c1 c2 r5 c6 ecl output servo controller r2 unused drive-line termination feedback signal lino 3 modulator modulated output pin diode bias light sample laser output beam splitter laser laser bias component list r1 = 50 ? r2 = 50 ? r3 = 2k ? r4 = 50 ? r5 = 10 ? r6 = rx r7 = ry r8 = rz c1 = 0.12 f c2 = 0.12 f c3 = 15 nf c4 = cx c5 = 15 nf c6 = 10 nf l1 = 330 h l2 = 330 h
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 14 of 18 mindspeed proprietary and confidential figure 12 illustrates the CX60087 configured as differential-mode lino 3 driver. figure 12. CX60087 differential-mode lino 3 modulator driver application vee vee vee vee vee CX60087 dutycntl vee ipcntl ipmonp ipmonn gnd polaritycntl vee gnd clkin gnd datain gnd vee ib veeo gndo ipoutp gndo ipoutn gndo retimdisable los clkcap ibmon ibcntl vee veeo datacap 28 27 26 25 24 23 22 21 20 19 15 9 5 1 4 3 2 8 7 6 12 11 10 14 13 18 17 16 index 30 29 gndo vee r3 r2 c5 c3 amp1 amp2 r4 r5 r6 -2.0 v c4 optional duty control circuit differential mode modulator drive lines +1.0 v l1 +1.0 v l2 c1 c2 r1 c6 ecl output servo controller feedback signal lino 3 modulator modulated output pin diode bias light sample laser output beam splitter laser laser bias component list r1 = 10 ? r2 = 2k ? r3 = 50 ? r4 = rx r5 = ry r6 = rz c1 = 0.12 f c2 = 0.12 f c3 = 15 nf c4 = cx c5 = 15 nf c6 = 10 nf l1 = 330 h l2 = 330 h
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 15 of 18 mindspeed proprietary and confidential application notes for eml and dml applications. the CX60087 can also be used for eml or dml applications, however it is important to note that for optimum eye opening and perf ormance the following limitations exist: when driving a 50 ohm load directly, as in the case of eml (externally modulated laser) or dml (direct modulated laser) the cx6 0087 exhibits a range of linear operation spanning 80% to 100% of the maximum voltage swing realized. in order to optimize performace for low er signal swings, it is necessary to use an external 50 ohm attenuator network, in order to drop the signal swing to match the application. when us ed with a bias-tee, the linear range of adjustability spans approximatly 60% to 100% of the maximum. this level of adjustment is generally suffici ent for ea modulators and cooled dml applications. package pins assignments the CX60087 package terminal assignments are listed in table 6 and illustrated in figure 13. table 6. CX60087 package terminal assignments package terminal number signal name package terminal number signal name 1 ib 16 clkcap 2 ibcntl 17 dutycntl 3 ibmon 18 vee 4 vee 19 ipcntl 5 polcntl 20 ipmonp 6 los 21 ipmonn 7 retimdisable 22 gnd 8 datacap 23 veeo 9 vee 24 gndo 10 gnd 25 ipoutn 11 datain 26 gndo 12 gnd 27 ipoutp 13 clkin 28 gndo 14 gnd 29 veeo 15 vee 30 gndo
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 16 of 18 mindspeed proprietary and confidential package dimensions figure 13 illustrates CX60087 package dimensions in millimeters. figure 13 CX60087 package dimensions
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 17 of 18 mindspeed proprietary and confidential ordering information name number package data 10 gbs lithium niobate modulator driver CX60087- (tbd) 30 pin flat pack. revision history revision date comments CX60087 4/19/00 original issue. CX60087v1a 5/8/00 internal review copy, not for release. requires update to CX60087 design specifications. CX60087v1b 6/21/00 internal review copy, not for release. added review comments. CX60087v1c 7/26/00 internal review copy, not for release. added review comments. added illustration of output response eye di splays. removed laser modulator references and eml driver system block diagrams. added single-ended mode and differential mode lithium niobate modulator driver sbd illustrations. CX60087v1d 7/28/00 internal review copy, not for release. reviewed specifications, text, and figures. CX60087v1e 8/2/00 added review corrections and additions. CX60087v1f 8/10/00 internal review copy, not for release. added new data to features and applications. CX60087v1g 9/22/00 internal review copy, not for release. added review data CX60087v1h 9/28/00 internal review copy, not for release. added review data CX60087v2 3/8/01 front page features and application data edits CX60087v2a 5/8/01 added note on jitter specification, and temperature dependent crossover shift in during retiming tests CX60087v3 5/18/01 modified figure 3, figure 4, and figure 5. table 3 values modified, added note on delay increase over temper ature. ? 2001 mindspeed technologies tm , a conexant business. all rights reserved. information in this document is provided in connection with mindspeed technologies (?mindspeed?) products. these materials are provided by mindspeed as a service to its customers and may be used for informational purposes only. mindspeed assumes no responsibility for errors or omi ssions in these materials. mindspeed may make changes to specifications and product descriptions at any time, without notice. mindspeed makes no commitmen t to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its s pecifications and product descriptions. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. exce pt as provided in mindspeed?s terms and conditions of sale for such products, mindspeed assumes no liability whatsoever. these materials are provided ?as is? without warranty of any kind, either express or implied, relating to sale and/or use of mindspeed products including liability or warranties relating to fitness for a particular purpose, consequential or incidental damages, merchantability, or infringement of any patent, copyright or other intellectual property right. mindspeed further does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these materials. mindspeed shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. mindspeed products are not intended for use in medical, lifesaving or life sustaining applications. mindspeed customers using o r selling mindspeed products for use in such applications do so at their own risk and agree to fully indemnify mindspeed for any damages resulting from such imp roper use or sale. the following are trademarks of conexant systems, inc.: mindspeed technologies?, the mindspeed logo, and ?build it first??. pro duct names or services listed in this publication are for identification purposes only, and may be trademarks of third parties. third-party brands and names are the property of their respective owners. for additional disclaimer information, please consult mindspeed technologies legal information posted at http://www.mindspeed.com/ , which is incorporated by reference .
CX60087, 10 gbps eml and lino 3 modulator driver rev. 3, 05/18/01. information in this data sheet is preliminary and is subject to change without notice. pg. 18 of 18 mindspeed proprietary and confidential further information: literature@mindspeed.com (800) 854-8099 (north america) (949) 483-6996 (international) world headquarters conexant systems, inc. 4311 jamboree road newport beach, ca 92660-3007 phone: (949) 483-4600 fax 1: (949) 483-4078 fax 2: (949) 483-4391 americas u.s. northwest/ pacific northwest ? santa clara phone: (408) 551-0270 fax: (408) 249-7113 u.s. southwest ? los angeles phone: (805) 480-4169 fax: (805) 480-4486 u.s. southwest ? orange county phone: (949) 483-9119 fax: (949) 483-9090 u.s. southwest ? san diego phone: (858) 713-4730 fax: (858) 713-4008 u.s. north central ? illinois phone: (630) 773-3454 fax: (630) 773-3907 u.s. south central ? texas phone: (972) 733-0723 fax: (972) 407-0639 u.s. northeast ? massachusetts phone: (978) 367-3200 fax: (978) 256-6868 u.s. southeast ? north carolina phone: (919) 858-9110 fax: (919) 858-8669 u.s. southeast ?florida & south america phone: (727) 799-8406 fax: (727) 799-8306 u.s. mid-atlantic ? pennsylvania phone: (215) 244-6784 fax: (215) 244-9292 canada ? ontario phone: (613) 271-2358 fax: (613) 271-2359 europe europe central ? germany phone: +49 89 829-1320 fax: +49 89 834-2734 asia ? pacific taiwan phone: (886-2) 2-720-0282 fax: (886-2) 2-757-6760 australia phone: (61-3) 9583 2650 fax: (61-3) 9583 9453 china ? central phone: 86-21-6361-2515 fax: 86-21-6361-2516 china ? south phone: (852) 2 827-0181 fax: (852) 2 827-6488 china ? south (satellite) phone: (86) 755-5182495 http://www.mindspeed.com/ china ? north phone: (86-10) 8529-9777 fax: (86-10) 8529-9778 india - south phone: (91-80) 227-3130 fax: (91-80) 227-3129 korea phone: (82-2) 565-2880 fax: (82-2) 565-1440 korea (satellite) phone: (82-53) 745-2880 fax: (82-53) 745-1440 singapore phone: (65) 737 7355 fax: (65) 737 9077 fax: (86) 755-5183024 europe north ? england, phone: +44 (0)118 920 9500 fax: japan phone: (81-3) 5371 1520 fax: (81-3) 5371 1501 india - north phone: (91-11) 341-2216 fax: (91-11) 341-2217 middle east, africa sales +44 (0)118 920 9595 europe ? israel/greece phone: +972-9-961-5100 fax: +972-9-961-5166 europe south ? france phone: +33 (0)1 56 30 80 40 fax: +33 (0)1 56 30 80 20 europe mediterranean ? italy phone: +39 02 93179911 fax: +39 02 93179913 europe ? sweden phone: +46 (0) 8 5091 4319 fax: +46 (0) 8 590 041 10 europe ? finland phone: +358 (0) 9 85 666 435 fax: +358 (0) 9 85 666 220

▲Up To Search▲

Price & Availability of CX60087

	To Download CX60087 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .